Aluminium clamping profile with rubber seals
Aluminium clamping profile with rubber seals is designed to install polycarbonate glass on rafters. It consists of a sealing gasket and a screwed-down aluminum frame, which clamps multi-wall polycarbonate sheets firmly and securely in place. The profile is anodized.
Additional information
| Length | 1m, 2m, 3m, 4m |
| Thickness | For 10 mm polycarbonate For 16 mm polycarbonate For 20 mm polycarbonate |
Assembly
This system can be used with multi-wall polycarbonate up to 25 mm thickness, and solid polycarbonate. It can also be used with glass and glass units up to 24 mm thick. Sheets of polycarbonate will expand and contract when the temperature changes, always allow room for expansion when joining sheets. Slab width should be reduced by 10mm to allow for expansion. For example, if you are fitting a 10mm board and the rafters are 700mm apart (centre to centre) – use 690mm wide boards.
Pay attention! When ordering or cutting polycarbonate to the required length, remember that your sheet should be 10mm shorter than the rafters to allow fitting with aluminum F profile or plastic U profile on the end.
Length: 1m; 2m; 3m; 4 m
Material: anodised aluminium, rubber
Profiles and rubbers
Norhage Industri
Our experts are ready to assist you in choosing the best option for your growth business.
Call us today and we’ll jumpstart your project!